Mechanical Property of HVOF Inconel 718 Coating for Aeronautic Repair.

Journal of Thermal Spray Technology,  2014, Volume 23, Issue 3, pp 380-388.

Christophe Lyphout, Angelica Fasth, Per Nylen.

Production & Engineering Science, University West, Trollhättan, Sweden.

 

Abstract

 The module of elasticity is one of the most important mechanical properties defining the strength of a material which is a prerequisite to design a component from its early stage of conception to its field of application. When a material is to be thermally sprayed, mechanical properties of the deposited layers differ from the bulk material, mainly due to the anisotropy of the highly textured coating microstructure. The mechanical response of the deposited layers significantly influences the overall performance of the coated component. It is, therefore, of importance to evaluate the effective module of elasticity of the coating. Conventional experimental methods such as microindentation, nanoindentation and four-point bending tests have been investigated and their results vary significantly, mainly due to inhomogeneous characteristics of the coating microstructure. Synchrotron radiation coupled with a tensile test rig has been proposed as an alternative method to determine the coating anisotropic elastic behavior dependence on crystallographic orientations. The investigation was performed on Inconel 718 (IN718) HVOF coatings sprayed on IN718 substrates. Combining these experimental techniques yield a deeper understanding of the nature of the HVOF coating Young’s modulus and thus a tool for Design Practice for repair applications.

Go To Journal

Aeronautic Repair

 

Check Also

Advancing Fusion Energy: High-Field REBCO Superconducting Magnets in the SPARC TFMC Program - Advances in Engineering

Advancing Fusion Energy: High-Field REBCO Superconducting Magnets in the SPARC TFMC Program