Released November 16, 2026.
Significance
High-strength steel wires are commonly used in bridges, cableways, lifting equipment, and other structures that must withstand large tensile loads. Their strength and flexibility make them suitable for these applications, but repeated loading can gradually damage the material. Small cracks can form and grow over time, leading to wire fracture. Corrosion can also reduce fatigue resistance by creating surface pits where stress becomes concentrated.
Predicting fatigue failure requires understanding where cracks begin, how they grow, and how existing defects affect their development. Common methods have limitations in describing this process. Stress-life relationships can estimate how many loading cycles a wire can withstand before failure but cannot show how damage develops. Linear elastic fracture mechanics can predict crack growth but requires predefined cracks and additional criteria to determine how they spread. The presence of multiple cracks and irregular corrosion defects makes these analyses even more difficult.
Peridynamics offers another way to study how cracks develop in materials and instead of relying on the local equations used in conventional continuum mechanics, it considers how material points interact with their neighbors. These interactions are represented by bonds that can break as damage accumulates which allows cracks to form and spread naturally without having to define their paths in advance. Peridynamic simulations can require a lot of computing power, especially for three-dimensional structures, because they involve large numbers of interacting material points. Modeling complex shapes and applying different loads and boundary conditions can also be difficult.
To address these challenges, the research team from Southeast University led by Professor Huile Li developed a three-dimensional finite element method incorporating peridynamics to investigate fatigue damage in high-strength steel wires. Their research, published in Engineering Fracture Mechanics, integrates the approach into ANSYS, where conventional finite elements represent the material geometry and accommodate applied loads and boundary conditions. Peridynamic elements connect neighboring regions of the material, enabling the simulation of damage under repeated loading. Combined with a two-stage fatigue model, the method predicts crack initiation, propagation, and fatigue life, including the effects of pre-existing cracks and three-dimensional corrosion pits.
Each peridynamic bond is assigned a remaining fatigue life based on the strain it experiences during repeated loading. As this remaining life decreases, the bond eventually breaks, changing the stiffness of the material and redistributing internal forces. The model accounts for these changes during crack initiation and subsequent growth, using material parameters calibrated from experimental fatigue relationships and crack growth data.
The researchers first evaluated the method using a compact tension specimen which is a standard configuration for studying crack propagation. They found the predicted crack length closely followed experimental measurements, with the final error in fatigue life remaining below 5%. The calculated fracture path was also consistent with previously reported peridynamic simulations.
The researchers then examined notched high-strength steel wires under different loading conditions. The predicted fatigue lives agreed with experimental measurements within 10%, and the simulations reproduced how cracks advanced from the notch across the wire cross-section. Higher stress amplitudes and stress ratios accelerated crack growth and shortened fatigue life. They reported that size and shape of the initial crack also influenced fatigue performance. Deeper cracks produced greater stress concentrations and reduced the number of cycles to failure. Crack front geometry made a difference as well, with curved crack fronts providing longer fatigue lives than straight ones under the examined conditions.
To investigate corrosion damage, the research team examined wires with a single surface pit and pairs of pits positioned either along the wire axis or around its circumference. The predicted fatigue lives agreed well with experimental measurements, and the model identified where cracks began in an accurate way. For single and axially separated pits, cracks started at the deepest points, whereas closely spaced pits around the circumference caused cracks to form near the region where they met.
Pit depth and length had different effects on fatigue resistance. Deeper pits shortened fatigue life because of increased stress concentration. However, when depth and width remained constant, longer pits produced lower stress concentrations at their bottoms. Under one examined condition, increasing pit length extended the predicted fatigue life by more than 40%.
The relative position of two pits also affected their interaction. Closely spaced axial pits behaved more like an elongated defect, reducing local stress concentration and extending fatigue life. Circumferentially arranged pits showed the opposite tendency: those positioned close together experienced stronger interactions and shorter fatigue lives. Increasing their separation improved fatigue resistance and changed where cracks were likely to begin.
Beyond predicting fatigue life, the proposed new method provides a way to examine how internal damage changes as cracks develop in three dimensions. Its implementation in ANSYS allows engineers to use established tools for handling complex geometries, loading conditions, and structural analysis while examining fracture behavior through peridynamic interactions.
The findings also explain why corrosion damage cannot be assessed solely from the depth or number of visible pits. Their dimensions, orientation, and spacing affect how stresses are distributed within the wire. Defects that appear similar in severity may therefore produce different fatigue lives depending on their geometry and relative positions.
This understanding is relevant when evaluating deteriorated steel wires, where corrosion can produce irregular surface defects. Accounting for their three-dimensional characteristics provides a more detailed basis for assessing fatigue damage under repeated tensile loading. The method was demonstrated for individual wires, and the researchers identify its potential extension to cable systems containing multiple interacting wires, where frictional contact would also need to be considered.
Reference
Xiaopeng Wang, Huile Li, A 3D finite element method with peridynamics for fatigue analysis of high-strength steel wires, Engineering Fracture Mechanics, Volume 337, 2026, 111981,
Advances in Engineering Advances in Engineering features breaking research judged by Advances in Engineering advisory team to be of key importance in the Engineering field. Papers are selected from over 10,000 published each week from most peer reviewed journals.