Significance
Keeping surfaces cool under direct sunlight is difficult because they continuously absorb solar energy. Conventional cooling systems use electricity to remove this heat, but passive radiative cooling offers an alternative and allows materials to release thermal energy toward outer space through the atmospheric transparency window, between wavelengths of 8 and 13 micrometers. For effective daytime cooling, these materials must also reflect most incoming sunlight.
Polymers are suitable for this purpose because their molecular bonds support infrared emission, and their structures can be modified to improve light scattering. However, many conventional polymers are difficult to degrade or recycle, and can be an environmental concern. Cooling fabrics can also benefit from resistance to contamination and microbial growth.
Polylactic acid (PLA), a polymer derived from renewable resources, is a suitable material for recyclable cooling fabrics that can be chemically broken down into smaller molecules for recovery but has relatively low solar reflectivity which limits its cooling performance. Creating pores of different sizes can improve light scattering and adding zinc oxide (ZnO) nanoparticles can further increase sunlight reflection and provide antibacterial properties. Combining all these features requires careful control of pore formation and nanoparticle distribution.
To address these challenges, Dr. Qifan Yang, Yu Zheng, Luyao Wei, Huijing Gong, and Professor Shenglong Shang from the Shandong Key Laboratory of Polymeric Materials Recycling and Upcycling, together with Professor Yuchen Mao from Shanghai Dianji University, investigated the preparation and performance of porous PLA/cotton composite fabrics. Their research, published in ACS Applied Polymer Materials, focused on combining passive daytime radiative cooling with self-cleaning, antibacterial, and chemical recycling capabilities.
The team prepared the composite by applying a mixture of PLA and modified ZnO nanoparticles to cotton fabric, followed by freezing and freeze-drying. Water and 1,4-dioxane were used to create pores at different scales. Because these liquids freeze at different temperatures, their sequential solidification produces microscopic and nanoscopic pores that help scatter incoming sunlight. They treated ZnO particles with a silane coupling agent to improve their compatibility with the polymer and promote uniform distribution.
The authors first experiments examined how PLA concentration, water content, and ZnO loading influenced the fabric’s optical properties and found that adjusting the PLA and water content helped control pore formation, while adding ZnO substantially improved solar reflection. They observed at a ZnO loading of 15%, the fabric achieved a solar reflectivity of 87.15% and an infrared emissivity of 87.92%. Thermal analysis also indicated that ZnO had little effect on the material’s thermal stability.
Afterward, the research team performed outdoor measurements in Qingdao, China, which demonstrated that the composite could maintain temperatures below the surrounding air. For instance, under clear daytime conditions, the porous fabric achieved a reduction of approximately 3–5 °C, compared with about 2 °C for untreated cotton. They also noticed the ZnO-containing material performed best, and its cooling effect continued into the evening.
Further experiments examined the fabric on a heated surface and against human skin. Thermal imaging showed that the modified composite had a surface temperature approximately 6 °C lower than ordinary cotton when placed on skin. Cooling was also observed in an outdoor building simulation. They observed porous surface provided benefits beyond temperature control. Its microscopic roughness, together with ZnO, increased water repellency, with the strongest effect observed at 15% nanoparticle loading. Higher concentrations caused partial structural collapse and reduced this property. The fabric resisted wetting by coffee, milk, and green tea, and flowing water readily removed a colored contaminant from its surface.
ZnO also provided strong antimicrobial activity. At the optimal loading, the composite achieved inhibition rates of 99.68% against Escherichia coli and 100% against both Staphylococcus aureus and Candida albicans. The researchers attributed this effect to interactions between the nanoparticles and microbial cells, which can damage cellular structures and suppress growth.
The team also studied the chemical recycling of PLA through alcoholysis with methanol, which converts the polymer into methyl lactate and found without a catalyst, substantial PLA residue remained attached to the cotton fibers after treatment. Adding zinc acetate enabled effective depolymerization, providing a comparison for evaluating the role of ZnO already incorporated into the fabric.
The ZnO-containing composite also underwent successful depolymerization without an additional catalyst. Chemical analysis identified methyl lactate among the reaction products, while microscopic examination confirmed the removal of PLA from the cotton fibers. This established an additional function for the nanoparticles in promoting chemical recovery.
The new study of Qifan Yang et al. provides a practical approach to designing cooling fabrics with additional protective properties and improved recyclability. By controlling carefully the porous structure and incorporating ZnO nanoparticles, the researchers successfully combined several functions in a single material without affecting thermal stability. The ability of ZnO to assist in chemical recycling is also useful, as it shows how an additive can contribute to a material’s performance during use and its recovery afterward.
Reference
Qifan Yang, Yu Zheng, Luyao Wei, Huijing Gong, Yuchen Mao, Shenglong Shang; Preparation of Recyclable and Multifunctional Porous PLA (Polylactic Acid)/Cotton Fabric for Daytime Radiative Cooling. ACS Appl. Polym. Mater. 2026; 8 (8): 5688–5697.
Advances in Engineering Advances in Engineering features breaking research judged by Advances in Engineering advisory team to be of key importance in the Engineering field. Papers are selected from over 10,000 published each week from most peer reviewed journals.


