Advances in Engineering Advances in Engineering features breaking research judged by Advances in Engineering advisory team to be of key importance in the Engineering field. Papers are selected from over 10,000 published each week from most peer reviewed journals.
Acta Materialia, Volume 66, March 2014, Pages 360-369.
Kazunari Shinagawa.
Department of Advanced Materials Science, Faculty of Engineering, Kagawa University, Takamatsu, Kagawa 761-0396, Japan
Abstract
A combination of the phase-field method (PFM) and the discrete-element method (DEM) is proposed to simulate simultaneously the movement of particles and the grain growth behavior in powder compacts during sintering. To take the mutual interaction into consideration, a precise way of coupling PFM and DEM is developed based on a sintering model. The sintering forces and the contact areas in linked particles are evaluated from the phase field variables, computed in PFM and introduced into the calculation of the rigid motion of particles in DEM. Before treating actual problems as the application, the sintering process of two particles is simulated first for fundamental verification, including the case with different particle sizes. It is confirmed that the changes in the neck size and the center-to-center distance between particles are reproduced well using the proposed method. Secondly, the simulation of microstructural evolution during sintering is implemented for some small clusters of particles. The internal spatial structure and the outer shape of the clusters vary with the shrinkage deformation as well as the grain boundary migration in sintering. The proposed method of simulating the microstructural evolution in sintering bodies may be effective in the computer-aided design of microscale components or thin films produced by powder processing.
