Advances in Engineering Advances in Engineering features breaking research judged by Advances in Engineering advisory team to be of key importance in the Engineering field. Papers are selected from over 10,000 published each week from most peer reviewed journals.
S.R.I. Gabran, R.R. Mansour, M.M.A. Salama
Optics and Lasers in Engineering, Volume 50, Issue 5, May 2012
Abstract
Low power near-ultraviolet laser can be employed in various pattern transfer techniques such as maskless lithography and organic film ablation. Laser maskless lithography allows rapid prototyping using thin as well as thick photoresist films. Non-photosensitive organic films can be patterned by laser ablation, and this technique is applied in creating micro-molds for metal deposition using electroplating and electroless deposition. This paper presents experimental results, a quantitative study and modeling of laser maskless processing using desktop Nd:YAG laser system using four different photoresists. Process variables were experimentally optimized to identify the appropriate laser parameters that would yield reliable and reproducible patterns. A finite element thermal model of the ablation process was created to investigate the effects of different substrate materials on the process quality.
Go to Journal
