Advances in Engineering Advances in Engineering features breaking research judged by Advances in Engineering advisory team to be of key importance in the Engineering field. Papers are selected from over 10,000 published each week from most peer reviewed journals.
Journal of Bridge Engineering, Volume 18, Issue 6 ( 2013), P553-563.
Bin Li, Pedram Zohrevand, Amir Mirmiran.
Structural Engineer, HDR, 500 7th Ave., Manhattan, NY 10018. E-mail: [email protected]. &
Research Assistant Professor, Dept. of Civil and Environmental Engineering, Florida International Univ., Miami, FL 33174. E-mail: [email protected]. &
Vasant H. Surti Professor and Dean, College of Engineering and Computing, Florida International Univ., Miami, FL 33174 (corresponding author). E-mail: [email protected].
Abstract
Concrete-filled fiber-reinforced polymer (FRP) tubes (CFFTs) were initially developed without any internal steel reinforcement as viable alternatives to conventional RC columns in nonseismic regions. Studies have shown that extending CFFT application to seismic regions requires a moderate amount of internal steel reinforcement. To date, cyclic performance of CFFTs as part of a structural frame has not been assessed. This paper describes testing of four one-sixth-scale two-column bents: a control RC, a glass FRP-concrete frame (GFF), a carbon FRP-concrete frame (CFF), and a hybrid glass/carbon FRP-concrete frame (HFF). Each frame was tested under reverse cyclic lateral loading with a constant axial load. Specimen HFF with hybrid FRP tubes demonstrated the highest moment capacity and initial stiffness, with an increase of 200 and 70%, respectively, over the control specimen. Specimen GFF showed no sign of cracking up to a drift ratio of 15% with considerable residual strength, whereas specimen CFF had the least ductility. Glass FRP tubes extended the plastic hinge length of the pier columns to twice that of the control RC frame.
