Construction and Building Materials, Volume 35, October 2012, Pages 340-346.
Robert Medjo Eko, Engelbert Dieudonné Offa, Thierry Yatchoupou Ngatcha, Lezin Seba Minsili,
Laboratory of Engineering Geology, Department of Earth Sciences, Faculty of Science, University of Yaoundé I, PO Box 812, Yaoundé, Cameroon
LMM Laboratory, Department of Civil Engineering, National Polytechnic Advanced School, University of Yaoundé I, PO Box 8390, Yaoundé, Cameroon
Abstract
Used tires are dumped in the open air and consequently become a serious environmental concern in Cameroon. To find ways to recycle this waste material, a research project aimed at investigating the mechanical properties of unfired bricks reinforced with salvaged steel fibers from used tires was undertaken at the University of Yaoundé I, Cameroon. Tests of tensile strength were initially carried out using 6% cement to soil ratio to determine the critical fiber length and optimum fiber content. Mechanical properties, namely unconfined compressive strength, flexural strength, and tensile strength tests were evaluated afterwards by means of varying cement to soil ratio together with optimum fiber length and content.
Satisfactory results were obtained regarding the bond between recycled steel fibers and soil–cement. Data of tensile strength recorded showed that the critical fiber length and optimum fiber content were respectively 35mm and 2% by volume. It was also observed that mechanical properties evaluated over time are unaffected by the presence of optimum fiber content despite the random distribution of the latter. Further analysis of experimental results led to the conclusion that steel fibers act like springs by helping the masonry unit absorb a substantial plastic energy and resist large deformation without full disintegration.
Advances in Engineering Advances in Engineering features breaking research judged by Advances in Engineering advisory team to be of key importance in the Engineering field. Papers are selected from over 10,000 published each week from most peer reviewed journals.