Advances in Engineering Advances in Engineering features breaking research judged by Advances in Engineering advisory team to be of key importance in the Engineering field. Papers are selected from over 10,000 published each week from most peer reviewed journals.
Powder Technology, Volume 238, April 2013, Pages 2-13.
Ineide Pinheiro, Paulo J. Ferreira, Fernando A. Garcia, Marco S. Reis, Ana C. Pereira, Christine Wandrey, Hamideh Ahmadloo, José L. Amaral, David Hunkeler, Maria G. Rasteiro
Collaborative Research:
Centre for Chemical Processes Engineering and Forest Products, Coimbra University, Portugal &
Chemical Engineering Department, Coimbra University, Pólo II, 3030‐790 Coimbra, Portugal &
École Polytecnique Fédérale de Lausanne, Switzerland &
RAIZ—Institute of Forest and Paper Research, Portugal &
Aqua + Tech, Switzerland.
Abstract
Aggregation of particles is fundamental for improving the performance of many solid/liquid processes. Aggregation can be induced by different means, and one of the most common is based on the addition of polymeric additives, namely polyelectrolytes. In this work we have studied the flocculation of precipitated calcium carbonate (PCC), which is used as a filler in papermaking, and is induced by a range of cationic polyacrylamides with different structures, varying in molar mass and degree of branching. The flocculation process was monitored continuously using the LDS technique (laser diffraction scattering), which provides information about the size distribution and structure (fractal dimension) of the aggregates, for each sampling instant and, thus, about the kinetic curve for the flocculation process. This information has then been used to produce a model, based on an experimental design strategy, which allows us to relate flocculation efficiency with the PEL characteristics and concentration. The Partial Least Squares (PLS) regression method was selected to perform the regression, given the significant co linearity among the input variables. The results obtained lead us to conclude that the polymer intrinsic viscosity (related with the PEL molar mass and charge density, and supplying information about the volume of the polymer molecule in the solution) and the degree of branching are the parameters with a stronger influence on flocculation efficiency. The PLS models developed were also successfully validated using an independent data set, which provides confidence on their consistency and prediction accuracy.
