Investigation of heat transfer in square porous-annulus

Irfan Anjum Badruddin, Abdullah A.A.A. Al-Rashed, N.J. Salman Ahmed, Sarfaraz Kamangar
International Journal of Heat and Mass Transfer, Volume 55, Issues 7–8, March 2012

Abstract

The current study is focused to analyze the heat transfer characteristics in a porous duct. The mathematical model of heat transfer in a porous duct was solved by converting the governing partial differential equations into a set of algebraic equations with the help of finite element method. A simple three noded triangular element is used to mesh the duct domain. The current problem consists of a square duct with outer walls being exposed to hot temperature Th, and inner walls subjected to cool temperature Tc. Emphasis is given to investigate the effect of width ratio of cavity on heat and fluid flow characteristics inside the porous medium. The results are reported for various duct width ratios, Rayleigh number etc. It is found that the Nusselt number increases with increase in height of cavity along the vertical walls of duct; however the Nusselt number for certain values of duct ratio oscillates along the width of the porous medium at bottom wall of the cavity.

Go to Journal

Check Also

Fatigue Crack Growth Behavior of WAAM Steel Plates: Experimental Analysis and Comparative Study - Advances in Engineering

Fatigue Crack Growth Behavior of WAAM Steel Plates: Experimental Analysis and Comparative Study