Mechanical Engineering

Noureddine El Meiche, Abdelouahed Tounsi, Noureddine Ziane, Ismail Mechab, El Abbes Adda.Bedia Laboratoire des Matériaux et Hydrologie, Université de Sidi Bel Abbes, Algeria ,Received 19 September 2010. Revised 7 January 2011. Accepted 13 January 2011. Available online 25 January 2011.

Manu Prakasha, John W.M. Bushb Junior Fellow, Harvard Society of Fellows, Harvard University, United States, Available online 28 December 2010.

A.J Mian, N. Driver, P.T. Mativenga Manufacturing and Laser Processing Group, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, M13 9PL, Manchester, United Kingdom ,Received 29 September 2010. Revised 10 January 2011. Accepted 14 January 2011. Available online 2 February 2011   Abstract In micro-machining the so called “size effect” is identified as critical in defining process …

H. Ku, H. Wang, N. Pattarachaiyakoop, M. Trada Centre of Excellence in Engineered Fibre Composites and Faculty of Engineering, University of Southern Queensland, Australia ,Received 15 March 2010; revised 19 November 2010; Accepted 8 January 2011. Available online 15 January 2011.

Fernando Fraternali, Vincenzo Ciancia, Rosaria Chechile, Gianvittorio Rizzano, Luciano Feo, Loredana Incarnato Department of Civil Engineering, University of Salerno, 84084 Fisciano (Sa), Italy,Available online 1 April 2011.

Zafer KazancıCorresponding Turkish Air Force Academy, Aeronautical Engineering Department, 34149 Yeşilyurt, İstanbul, Turkey, Received 12 October 2009; revised 28 February 2011; Accepted 20 March 2011. Available online 26 March 2011.

Ehsan Taghipour, Ahmad Assempour Center of Excellence in Design, Robotics and Automation, Department of Mechanical Engineering, Sharif University of Technology, Azadi Avenue, P.O. Box 11365-9567, Tehran, Iran, Received 11 May 2010; revised 5 January 2011; Accepted 8 February 2011. Available online 16 February 2011.

Christian Garnier, Marie-Laetitia Pastor, Florent Eyma, Bernard Lorrain Université de Toulouse, Institut National Polytechnique de Toulouse, Ecole Nationale d’Ingénieurs de Tarbes, Laboratoire Génie de Production, Avenue, Available online 7 January 2011.

Mohsen Habibi, Behrooz Arezo, Mehrdad Vahebi Nojedeh, Department of Mechanical Engineering, Amirkabir University of Technology (Tehran Polytechnic), 424 Hafez Avenue, Tehran 15875-4413, Iran, Received 16 January 2011; Accepted 26 January 2011. Available online 17 February 2011.

M. Nishikawa, Author, K. Hemmi, N. Takeda Department of Nanomechanics, Tohoku University, 6-6-01 Aoba-yama, Aoba-ku, Sendai 980-8579, Japan, Available online 27 November 2010.

Mohammad Abdelrahman, Insu Chang, Sang-Young Park Astrodynamics and Control Laboratory, Department of Astronomy, Yonsei University, Seoul 120-749, Republic of Korea, Received 18 November 2009; Accepted 24 February 2011. Available online 4 March 2011.

Rohith Uppaluri, N. Venkata Reddy, P.M. Dixit Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur 208016, India, Received 8 March 2010; revised 3 February 2011; Accepted 10 February 2011. Available online 21 February 2011.

S. Narendar, D. Roy Mahapatra, S. Gopalakrishnan Structural Test Facility, Directorate of Flight Structures, Defence Research and Development Laboratory, DRDO, Kanchanbagh, Hyderabad 500, Available online 8 March 2011.

O.A. Josepha, Author, R. Sridharanb Department of Mechanical Engineering, KMCT College of Engineering, Kalanthode 673601, Manassery, Calicut, Kerala, India, Received 5 August 2010; revised 9 January 2011; Accepted 22 February 2011. Available online 14 April 2011.

S.M.R. Khalilia, b, c, Corresponding Author Contact Information, M. Soroushb, A. Davara, O. Rahmania Centre of Excellence for Research in Advanced Materials and Structures, Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran, Available online 20 October 2010.

Aline Souza de Paula, Marcelo Amorim Savi Universidade de Brasília, Department of Mechanical Engineering, 70.910.900, Brasília, DF, Brazil, Received 17 July 2009; revised 29 November 2010; Accepted 17 April 2011. Available online 10 May 2011.

M.J. Berminghama, J. Kirschb, S. Sund, S. Palanisamya, M.S. Darguscha, c, Defence Materials Technology Centre, School of Mechanical and Mining Engineering, The University of Queensland, Australia, Received 17 December 2010; revised 13 February 2011; Accepted 17 February 2011. Available online 24 February 2011.