Advances in Engineering Advances in Engineering features breaking research judged by Advances in Engineering advisory team to be of key importance in the Engineering field. Papers are selected from over 10,000 published each week from most peer reviewed journals.
Hosei Nagano, Hosei Nagano, Yuji Nagasaka Applied Thermal Engineering, Volume 31, Issue 16, November 2011
Read More »Development of a lightweight deployable/stowable radiator for interplanetary exploration
Mechanical Engineering
Mathematical modelling of swirling flow in hydraulic turbines for the full operating range
R.F. Susan-Resiga, S. Muntean, F. Avellan, I. Anton Applied Mathematical Modelling, Volume 35, Issue 10, October 2011
Read More »Time step size and model stiffness in the simulated slew of a tow of square sails
Gyula Greschik Advances in Space Research,Volume 48, Issue 11,December 2011
Read More »A prediction of the acoustical properties of induction cookers based on an FVM–LES-acoustic analogy method
Y.S. Wang, X.L. Tang, C.-M. Lee Applied Mathematical Modelling, Volume 35, Issue 10, October 2011
Read More »Vibrations of inclined cables under skew wind
Nicola Impollonia, Giuseppe Ricciardi, Fernando Saitta International Journal of Non-Linear Mechanics, Volume 46, Issue 7, September 2011
Read More »Non-linear modal analysis of a rotating beam
H. Arvin, F. Bakhtiari-Nejad Volume 46, Issue 6, July 2011
Read More »On Maxwell fluids with relaxation time and viscosity depending on the pressure
Satish Karraa, Vít Průšab, K.R. Rajagopala International Journal of Non-Linear Mechanics Volume 46, Issue 6, July 2011
Read More »Nanocomposites based on silica-reinforced ethylene–propylene–diene–monomer/acrylonitrile–butadiene rubber blends
Suzana Samaržija-Jovanovića, Vojislav Jovanovića, Gordana Markovićb, Sandra Konstantinovićc, Milena Marinović-Cincovićd Volume 42, Issue 5, July 2011
Read More »Characterization of carbon nanofiber/epoxy nanocomposites by the nanoindentation technique
M. Sánchez, J. Rams, M. Campo, A. Jiménez-Suárez, A. Ureña Volume 42, Issue 4, June 2011
Read More »Global and bifurcation analysis of a structure with cyclic symmetry
E. Sarrouy, A. Grolet, F. Thouverez Volume 46, Issue 5, June 2011
Read More »FGM and laminated doubly curved shells and panels of revolution with a free-form meridian: A 2-D GDQ solution for free vibrations
Francesco Tornabene, Alfredo Liverani, Gianni Caligiana Volume 53, Issue 6, June 2011
Read More »Property enhancement of a carbon fiber/epoxy composite by using carbon nanotubes
M.T. Kima, K.Y. Rheea, J.H. Leeb, D. Huia, Alan K.T. Laud Volume 42, Issue 5, July 2011
Read More »Large-deflection and post-buckling behavior of slender beam-columns with non-linear end-restraints
Carlos Vega-Posadaa, Mauricio Areiza-Hurtadob, J. Dario Aristizabal-Ochoac Volume 46, Issue 1, January 2011
Read More »A model of one-surface cyclic plasticity and its application to springback prediction
S.L. Zanga, C. Guoa, S. Thuillierb, M.G. Leec Volume 53, Issue 6, June 2011
Read More »Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades
I. Amenabara, A. Mendikutea, A. López-Arraizaa, M. Lizaranzub, J. Aurrekoetxeac Volume 42, Issue 5, July 2011
Read More »Transmissibility of non-linear output frequency response functions with application in detection and location of damage in MDOF structural systems
Z.Q. Langa, G. Parkb, C.R. Farrarb, M.D. Toddc, Z. Maoc, L. Zhaoa, K. Wordend Volume 46, Issue 6, July 2011
Read More »Towards a steady forming condition for radial–axial ring rolling
Lianggang Guo, He Yang Volume 53, Issue 4, April 2011
Read More »